Silvercrest swv 733 a1 User Manual And Service Information

SilverCrest SWV 733 A1
English - 325
 The configuration of the dual-band wifi range extender is incorrect. Reset the dual-band wifi range
extender to its original condition. To do so, press the Reset button (5) for approximately 3 seconds
with a sharp object and then release it again. The LEDs then briefly go out and this will reboot the
dual-band wifi range extender. The dual-band wifi range extender requires a certain amount of time
(boot time) before it is ready to use. Wait for approximately 30 seconds before using the dual-band
wifi range extender.
 Please check whether the network connection between the end device and the dual-band wifi range
extender is established correctly. Note that the network is disconnected after the configuration in the
menu. Your system requires a brief period to restore the network connection.

Silvercrest swv 733 a1 Specifications

General

Brand	Silvercrest
Model	swv 733 a1
Category	Extender
Language	English