71 GB/IE
for 3 seconds or switch the device off using the
ON / OFF / MEASURE button
8
.
If you have activated Bluetooth
®
data transfer, the
data will be transferred after the measurement. The
thermometer displays the symbol for Bluetooth
®
during transfer.
Note: The “HealthForYou” app must be activated
for the transfer to occur. If the current data is not
displayed on your smartphone, repeat the transfer
process as described in the chapter “Transferring
measured values”.
The device will switch off automatically after 30
seconds (if no Bluetooth
®
connection is available)
or press the ON / OFF / MEASURE button
8
for 5 seconds to switch it off. By switching off the
device, you also leave “Measuring object temper-
atures” mode.
Please note that the displayed temperature is the
temperature which has been determined and is not
the adjusted surface temperature. It cannot be
compared with the forehead / ear temperature.
Di
splaying saved measured values
The device saves the measured values of the last 30
measurements automatically. If the 30 memory spaces
have been exceeded, the respective oldest measured
value will be deleted.
The saved measured values can be requested as
follows:
391893_2201_V4.0_silv_Multifunktionsthermometer_Content_OS_DE_GB_FR_NL_PL_CZ.indd 71391893_2201_V4.0_silv_Multifunktionsthermometer_Content_OS_DE_GB_FR_NL_PL_CZ.indd 7103.05.22 08:4103.05.22 08:41
To Next Page
Loading...
