74 GB/IE
If you have activated Bluetooth
®
data transfer, the
data will be transferred after the measurement. The
thermometer displays the symbol for Bluetooth
®
during transfer.
Note: The “HealthForYou” app must be activated
for the transfer to occur. If the current data is not
displayed on your smartphone, repeat the transfer
process as described in the chapter “Transferring
measured values”.
The device will switch off automatically after 30
seconds (if no Bluetooth
®
connection is available)
or press the ON/OFF/MEASURE button
8
for
5 seconds to switch it off. By switching off the de-
vice, you also leave “Measuring object tempera-
tures” mode.
Please note that the displayed temperature is the
temperature which has been determined and is not
the adjusted surface temperature. It cannot be
compared with the forehead/ear temperature.
Di
splaying saved measured values
The device saves the measured values of the last 30
measurements automatically. If the 30 memory spaces
have been exceeded, the respective oldest measured
value will be deleted.
437990_2304_V2.0_silv_Multifunktionsthermometer_Content_OS.indd 74437990_2304_V2.0_silv_Multifunktionsthermometer_Content_OS.indd 74 15.06.23 14:2215.06.23 14:22
To Next Page
Loading...
