75 GB/IE
The saved measured values can be requested as
follows:
To switch on the multi-function thermometer, press
the ON/OFF/MEASURE button
8
for one
second.
Press the MEM button
7
. The last measured
value will appear on the display.
If you have activated Bluetooth
®
data transfer, the
data will be transferred after the measurement. The
thermometer displays the symbol for Bluetooth
®
during transfer.
Note: The “HealthForYou“ app must be activated
for transfer to occur. If the current data is not dis-
played on your smartphone, repeat the transfer
process as described in the chapter “Transferring
measured values“.
To change between individual saved measured
values, press the MEM button
7
.
The device will switch off automatically after 30
seconds (if no Bluetooth
®
connection is available)
or press the ON/OFF/MEASURE button
8
for
5 seconds to switch it off.
Transferring measured values
Transferring via Bluetooth
®
low
energy technology
You have the option of transferring the measured values
and values saved on your device to your smartphone
using Bluetooth
®
low energy technology.
437990_2304_V2.0_silv_Multifunktionsthermometer_Content_OS.indd 75437990_2304_V2.0_silv_Multifunktionsthermometer_Content_OS.indd 75 15.06.23 14:2215.06.23 14:22
To Next Page
Loading...
