Silverline SDS Plus - Product Specification; Sound and Vibration Information

EN
6
Voltage: ............................................................................................... 230-240V~, 50Hz
Power:....................................................................................................................1500W
No load speed: ................................................................................................0-880min
-1
Impact rate: ................................................................................................... 0-4350bpm
Impact energy: ...........................................................................................................5.5J
Chuck: .................................................................................................................SDS Plus
Accessory keyed chuck capacity: ..........................................................................0-13mm
Gearbox grease capacity: ............................................................................................80g
Ingress protection: ....................................................................................................IP20
Protection Class: ..........................................................................................................
Power cable length: .....................................................................................................2m
Max drilling capacity: ......................................................................... Concrete: Ø 32mm
.................................................................................................................Wood: Ø 40mm
.................................................................................................................. Steel: Ø 13mm
Dimensions (L x W x H): ......................................................................390 x 95 x 280mm
Weight: .................................................................................................................... 5.5kg
As part of our ongoing product development, specications of
Silverline products may alter without notice.
Sound & vibration information
Sound pressure L
PA
: .......................................................................................... 96.4dB(A)
Sound power L
WA
: ........................................................................................... 107.4dB(A)
Uncertainty K: .............................................................................................................3dB
Weighted vibration (Hammer drill mode): ...................................................19.327m/s
2
Weighted vibration (Chisel mode): ...............................................................17.879m/s
2
Uncertainty: ..........................................................................................................1.5m/s
2
The sound intensity level for the operator may exceed 85dB(A)
and sound protection measures are necessary.
Specication
Description of Symbols
The rating plate on your tool may show symbols. These represent important information about the
product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
WARNING: To reduce the risk of injury, user must read instruction
manual
Always disconnect from the power supply when adjusting, changing accessories,
cleaning, carrying out maintenance and when not in use!
Class II construction (double insulated for additional protection)
DO NOT use on scaffolding or ladders!
Environmental Protection
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local authority or retailer for
recycling advice.
Caution!
DO NOT use in rain or damp environments!
Conforms to relevant legislation and safety standards.
Introduction
Thank you for purchasing this Silverline product. This manual contains information necessary for safe
and effective operation of this product. This product has unique features and, even if you are familiar
with similar products, it is necessary to read this manual carefully to ensure you fully understand
the instructions. Ensure all users of the product read and fully understand this manual. Keep these
instructions with the product for future reference.
Original Instructions
Technical Abbreviations Key
V Volts
~, a.c. Alternating current
A, mA Ampere, milli-Amp
n
0
No load speed
Nm Newton metres (torque)
Ø Diameter
Hz Hertz
W, kW Watt, kilowatt
min
-1
Operations per minute
bpm Blows (impacts) per minute (drill)
J Joules
dB(A) Decibel sound level (A weighted)
m/s
2
Metres per second squared (vibration magnitude)
268819_OwnerManual.indd 6268819_OwnerManual.indd 6 24/10/2023 15:2824/10/2023 15:28