SYSTEM OPERATIONS-52
Visually inspect the exhaust system for
leaks. If any leak is observed, immediately
turn OFF the engines and contact your
Silverton Dealer for inspection and repair,
if necessary.
Check the transmission fl
uid level. The
engines should be running at idle speed
and at normal operating temperature. The
transmission fl uid should read FULL on
the “dipstick”. If the fl uid level is low, add
suffi cient transmission fl uid to raise the
level to the FULL mark or slightly lower.
DO NOT overfi ll. If the fl uid level is low,
check the transmission(s) for leaks and
contact your Silverton Dealer for repairs if
leaks are noted.
Refer to the ENGINE MANUAL included
with your Owner’s Packet for addi-
tional technical information concern-
ing maintenance requirements for the
specifi c engines with which your 43SB
is equipped.
To Next Page
Loading...