EasyManua.ls Logo

Silverton 43SB - Maintenance Schedule

Default Icon
207 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GLOSSARY-11
MAINTENANCE SCHEDULE
ITEM
DAILY 25 Hr. 50 Hr. 100 Hr. YEARLY
Check oil levels
Check fuel system for leaks
Check cooling system for leaks
Check exhaust system for leaks
Check for loose or damaged parts
Change engine oil
Replace oil filter
Clean flame arrestor
Check electrical connections
Check belt drive tension
Tighten engine mounts
Check engine alignment & tighten bolt
Check condition of zinc anodes
Check fuel canister for corrosion
Check condition of spark plugs-NOTE 1
ITEM
DAILY 75 Hr. 250 Hr. YEARLY 2 YRS.
Check exhaust system for leaks
Check for loose or damaged parts
Check fuel system lines for leaks
Drain water and sediment from primary fuel filter
Tighten engine mounts
Check engine alignment & tighten bolt
Clean or replace air cleaner elements-NOTE 2
Check oil levels
Check oil and filters-NOTE 3
Check cooling system for leaks
Check zinc anodes
Clean seawater strainer and inspect and lubricate impeller-NOTE 4
ITEM
DAILY 25 Hr. 50 Hr. 100 Hr. YEARLY
Check Transmission fluid level
Change Transmission fluid
ITEM
DAILY 25 Hr. 50 Hr. 100 Hr. YEARLY
Check propeller for dents or gouges-NOTE 5
ITEM
DAILY 25 Hr. 50 Hr. 100 Hr. YEARLY
Halon fire extinguishers-NOTE 6
Check Battery electrolyte level
Check raw water strainers (generators, engines, AC units)
Check pumps (bilge & shower sump) for automatic operation
MISCELLANEOUS MAINTENANCE SCHEDULE
GASOLINE ENGINE MAINTENANCE SCHEDULE
DIESEL ENGINE MAINTENANCE SCHEDULE
TRANSMISSION MAINTENANCE SCHEDULE
PROPELLER MAINTENANCE SCHEDULE
NOTE 1 - Replace spark plugs yearly
NOTE 2 - More often if necessary
NOTE 3 - Or once a year
NOTE 4 - More frequently if operated in shallow water
NOTE 5 - Retrue if necessary
NOTE 6 - Remove and weight every six months

Table of Contents

Related product manuals