SYSTEM OPERATIONS-69
OIL X-CHANGE-R SYSTEM
(OPTIONAL) _________________
You may have chosen as an option when
you purchased your 43SB, an OIL X-
CHANGE-R System, factory installed at
the Silverton plant. The purpose of the
OIL X-CHANGE-R System is to automati-
cally drain, fi ll and maintain engine and/or
transmission oil with relative ease and no
spilled oil, which is normally associated
with your required periodic oil changes.
The OIL X-CHANGE-R System consists
of an enclosed pump, located in the en-
gine compartment, which operates on DC
electrical power. The system pump is con-
trolled by a breaker switch, located on the
AC/DC Electrical Panel and described as
“Accessory” (Refer to the Electrical Pages
in this section of this Owner’s Manual
for the location of the switch for the OIL
X-CHANGE-R System). Operation of the
system is accomplished by turning ON the
toggle switch located on the pump unit.
Refer to the OIL X-Change-R System
Manual included with your Owner’s
Packet for information concerning the
operation and maintenance of this sys-
tem.
To Next Page
Loading...