SIM2 DOMINO 20H / DOMINO 30H
RS-232C CONTROL SPECIFICATIONS
6
Direct access codes
Goto Brightness
BE EF 02 06 00 C7 E1 7E 01 00 00 00 00
Goto Contrast
BE EF 02 06 00 16 E0 7F 01 00 00 00 00
Goto Color
BE EF 02 06 00 19 F4 80 01 00 00 00 00
Goto Tint
BE EF 02 06 00 C8 F5 81 01 00 00 00 00
(1)
When the unit is in Stand-by state, this command switches on the unit and the last source
memorised prior to switch off is automatically selected.
(2)
When the unit is in Stand-by state, this command switches on the unit and selects the corresponding
Source.
To Next Page
Loading...
