www.ssimder.com
1.1
General
Congratulations on choosing MIG welding machine. Used correctly, our products can
significantly increase the productivity of your welding, and provide years of economical service.
This operating manual contains important information on the use, maintenance and safety of
our product. Please read the manual carefully before using the equipment for the first time.
For your own safety and that of your working environment, pay particular attention to the safety
instructions in the manual.
For more information about our products, please visit our website: www.ssimder.com
The specifications presented in this manual are subject to change without prior notice.
Important notes
Items in the manual that require particular attention in order to minimize damage and personal
harm are indicated with the ’*NOTE’ notation. Read these sections carefully and follow the
instructions.
Disclaimer
While every effort has been made to ensure that the information contained in this guide is
accurate and complete, no liability can be accepted for any errors or omissions. We reserve the
right to change the specification of the product described at any time without prior notice.
1.2 Introduction
This MIG welding machine power source is a MIG power source designed for demanding
professional use in Steels. The power source has a control panel that allows ready control of
the functions of the power source and the wire feeder.
The MIG welding machine power source is inverter-based MIG welding machines with added
MMA function. The MIG function allows you to weld with Flux-cored wires.
The MIG welding machine is an inverter power source that can provide MIG, MMA. Its IGBT
power device with unique control mode provides excellent reliability with a high duty cycle.
The system has a closed loop feedback control, constant voltage output, which allows it to
operate with a wide tolerance to mains fluctuation, within ±15%.
The machine also has a very stable welding current in MMA, excellent arc ignition, and can be
used with a wide variety of welding electrodes.
Features
• Innovative IGBT Inverter Technology
• MIG with Flux-cored wire function
• LED Digital Display
• Suitable for 0.8 to 1.0 mm wires
To Next Page
Loading...