EasyManua.ls Logo

Simfer SYD 150 MD DC - Page 8

Simfer SYD 150 MD DC
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
30. If the power supply cable is damaged, it must be
replaced by its manufacturer or authorized technical
service or any other personnel qualied at the same
level, in order to avoid any dangerous situation.
31. If the appliance will not be used for extended
periods, the glass covers shall be removed.
Attention!
• This appliance includes inammable
and explosive gas R404A, R600a,R134a, R290.
The ventilation holes on the casing or the
body of the appliance shall be kept open to pre-
vent blocking
• Do not use mechanical tools or other mech-
anisms except the ones recommended by the
manufacturer to make defrosting quicker.
• The cooling circuit shall not be damaged.
• Except materials recommended by the man-
ufacturer, no electric appliances should be used
within food storage compartment of the appli-
ance.
• In order to decrease the risk of ignition, this
appliance shall only be installed and maintained
by Simfer services.

Related product manuals