Simoco SDM630 Operating Instructions

SDM630 DMR TIER II – OPERATING INSTRUCTIONS
© SimocoGroup Australasia 2013 page 10 TNM-U-E-0108 Issue 1.1
3. MENU SYSTEM
This section details the operation of the menu system for the SDM630.
The SDM630 has a menu system that is configurable by the FPP. The FPP has a pool of
menu entries that can be applied as required in the order required. In simple configurations,
no menu can be programmed, if required. See Figure 5 for example menu.
Pressing the “F4” key from the top-level channel screen enters the menu system. By default
this key has a soft menu label alongside it titled “MENU”. The soft key “F1” is generally the
accept or “OK” key.
The menus possible are:
• Zone (usually the first menu, as often accessed)
•
Squelch
•
Mute Adjust (FM) / Monitor (DMR)
• Phonebook
• Phonebook Edit
•
User Options
• Contrast
• Alert Volume
•
Radio Info
•
Mode
• RSSI
•
Setup
•
Stored Calls
• Messages
• No Menu
The presence and order of the above menu selections is determined by the FPP
configuration.
The
Setup
menu is a special case entry.
Setup
is a subgroup that can have any of the list of
menu selections assigned to it. This means that lesser used selections can be partly hidden
away under Setup subgroup if required, although still accessible.
The
User Options
menu group is also a menu subgroup. This subgroup usually contains
on/off functions, such as Key Beeps or Backlight
The order and presence of the Setup subgroup selections is determined by the FPP. For
instance
Info
,
RSSI
and
Contrast
could be placed under
Setup
.

Simoco SDM630 Specifications

General

Brand	Simoco
Model	SDM630
Category	Radio
Language	English