SDM630 DMR TIER II – OPERATING INSTRUCTIONS
© SimocoGroup Australasia 2013 page 28 TNM-U-E-0108 Issue 1.1
Pressing “
Menu
” or “
Back
” keys takes the radio back to the Menu screen.
A “Reset” function key press (if configured) takes the radio back to the default screen
display.
If “
VIEW
” is selected, pressing “
OK
” shows the Message View screen.
If “SMSG” is selected, pressing “OK” shows the Short Message screen only for a digital
channel, otherwise an error beep will sound.
If “
TXTMSG
” is selected, pressing “
OK
” shows the Edit Text Message screen only for a
digital channel, otherwise an error beep will sound.
4.2.12.2 View Received Messages Screen
Received messages (both short messages and text messages) can be viewed from this
screen.
This screen displays the received messages one by one, starting with the most recent
received message.
The information displayed for each message includes the sender ID (S Unit) and the first 2
lines of the received message in text string.
If no messages are stored, “NO RECORD” is displayed.
To step through other stored messages, use the
▼
and
▲
keys. If there is no further
message stored, an error beep will sound.
A “Reset” function key press (if configured) takes the radio back to the default screen
display.
If the “Back” or “Menu” key is pressed, the radio will return to the Messages Selection pop-
up Menu.
Pressing the “
OK
” key displays the Message View pop-up menu with further options.
.
To Next Page
Loading...
Need help?
General
