When the Backlight is enabled, the control screen will be illuminated whenever there is
any user activity. The backlight will remain on with no further user activity for the set
period, after which, the backlight will turn off.
The maximum backlight timeout period is programmed by the FPP. The numerical
values on the display are in seconds.
Note:-Received radio traffic events will not prevent the backlight timeout.
Use the ▼ and ▲ keys to select the required backlight timeout period.
To accept and save the setting and return to the previous screen, press the ‘S’ key.
6.17. BRIGHTNESS MENU
The Brightness menu allows the User to set the intensity of the control unit’s display
and key backlighting where this is possible.
Figure 32: Brightness Menu screen.
Use the ▼ and ▲ keys to select the required brightness level.
To accept and save the setting and return to the previous screen, press the ‘S’ key.
6.18. CALL DIVERT
The Call Divert menu provides the user with the facility to have Calls, Data messages
or both diverted to another radio.
Figure 33: Call Divert Menu screen.
Doc Number: TNM--U-E-0108 ISSUE 1.5 Page 53
To Next Page
Loading...
Need help?
General
