52
ENGLISH
AUTO.CLEAN.CYCLE
DOSE PROGRAM.
DELIVERY COUNT
ON-OFF PROGRAM.
CUP-WARMER PRO.
DATE/TIME
GRINDING
HISTORICAL ALARM
MAINTENANCE
LANGUAGE
TEMPERATURE
LIGHT ADJUST
AUTOMATIC CLEANING CYCLE
(function also available with T visualization key)
• Press the key to access program;
the display will read:
• Press and the display will read:
• The central key in each unit will begin
to flash on and off. Insert the blind filter (fig
2 A07) into the filter-holder, add half a dose
of PULICAFF and attach the filter-holder
into the unit where you intend to carry out
the automatic cleaning cycle. Carrying out a
cleaning cycle in more than one unit at a
time is possible.
• Press the key to start the unit
automatic cleaning cycle. The display
will read:
where 1L indicates that the cleaning cycle
has been activated within the 1st unit. Once
the cycle of 15 deliveries of 5 seconds each,
with a 10-second pause between each deli-
very, has been completed the selected unit
key will begin to flash on and off again
and the display will read.
RINSE
AUTO.CLEAN.CYCLE
AUTO.CLEAN.CYCLE
SELECT
RESET key to turn the machine on
and off and to exit menu.
7. PROGRAMMING
7.1
KEY
Technician/waiter key lock.
CURSOR key: to scroll
the menu and to increase
and decrease values.
ENTER key: to access the menu.
LIST OF PROGRAMMABLE FUNCTIONS
Operation to be carried out EXCLUSI-
VELY by a Qualified Technician.
Adjustment by NON qualified techni-
cians can invalidate the guarantee.
7.2
PROGRAMMING
AURELIA VIP PLUS
To access the programming units, proceed as
follows:
NOTE: the procedure can be carried out with
the machine on.
• Insert the key marked U (see chapter
“USE”) in the provided keyhole.
Fig. 28
2
1
3
4
5
6
1
LCD Display.
2
3
4
6
5
AUTO.CLEAN.CYCLE
1L
To Next Page
Loading...
