EasyManua.ls Logo

Simonelli Aurelia - Page 58

Simonelli Aurelia
192 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
56
ENGLISH
GRINDING CONTROL PROGRAM-
MING
The Aurelia Plus is equipped with an elec-
tronic system to control delivery times
according to the coffee grinding fineness.
The display will read:
By pressing the key on the line
above, it will read:
and in the line below, the current setting
Use the keys to change
the setting; use the key to quit the
function without confirming, or press the key
to confirm.
If the delivery time display reads:
then the sub-page for grinding control
values is skipped, to pass directly to the fol-
lowing page:
If the delivery time display is on when a deli-
GRINDING
very is started - unless with the Continuous
function - the bottom line of the display will
show the delivery time (or times if more than
one unit is delivering).
Each group has an area of the bottom line:
the area on the left is for unit 1; the area
alongside it is for unit 2 and so on, until the
area on the far right, which is for unit 4.
The different areas are separated by vertical
bars; if a group is not delivering, the area is
empty.
Here below is an example: unit 1 is delive-
ring (it has just started and 0 seconds have
passed); unit 2 has been delivering for 12
seconds and unit 4 is delivering (it has been
delivering for 21 seconds).
If the time is confirmed:
the machine passes to the grinding control
value settings.
By pressing the key the display will
read as follows:
where 00-40 indicates the maximum time (in
seconds) allotted for the delivery of a sam-
ple amount of coffee, equal to 10cc for a sin-
gle coffee and 30cc for a double coffee.
The first value will begin to flash on and off;
modify by using the keys.
To confirm press the key.
Press the key again to go on to the
next value.
To modify the previous value, proceed as
described above.
NOTE: If the system detects a delivery time (of
the sampled amount) inferior to the pro-
grammed minimum, the display will
read:
(See chapter called “MACHINE FUNC-
TION MESSAGES”) which means you
have to adjust the coffee grinder to
reduce the grain.
If the system detects a delivery time
(of the sampled amount) superior to the
programmed maximum, the display will
read:
DELIVERY TIME
DELIVERY TIME
SET
DELIVERY TIME
NOT SET
DELIVERY TIME
SET
FAULTS HISTORY
THURSDAY 12:00
0 I 12 I I 21
Area reserved to the
delivery time of unit 1
Area reserved to the
delivery time of unit 4
Area reserved to the
delivery time of unit 2
Area reserved to the
delivery time of unit 3
DELIVERY TIME
NOT SET
1 ESPRESSO 00-40
2ESPRESSO 00-40
COARSE GRINDING
FINE GRINDING

Table of Contents

Related product manuals