Simonelli Aurelia - Page 67

65
ENGLISH
Modify grinding degree
and press the key
or one of the keys
By leaving the machine in
the programming state,
within 10 minutes from the
last selection, the system will
return to the previous confi-
guration and the display will
indicate its reestablishment
of normal functioning.
DISPLAY AND KEY
INDICATIONS
The machine registers
values different from the
set values.
CAUSE
EFFECT
The machine registers
values different from the
set values.
A much longer delivery
time.
A much shorter delivery
time.
FINE GRINDING
SOLUTION
NOTES
COARSE GRINDING
OVERCURRENT ERR.
Incorrect electrical input
caused by a malfunction
in one of the machine
charges.
The display reading will
flash. The pump will
switch off. The heating
element and all other
functions will be dis-
abled.
Switch off the machine
and send for a specialist
technical engineer.
Press the
key or one of the keys