VdS Shunt lock function 3066
Page 20
3.0 Programming
3.1 Programming the Activation Units (MA and SA)
If you want to add the shunt lock components at some time after the initial installation,
open your locking plan with the password. If this is the initial installation, create a new
locking plan.
Click the locking above which you want to add an activation unit. Select
New
Locking. Then give the activation unit a name:
For example, Alarm system
In the field
Type, select Control unit. Click OK & Exit or OK & Next, if you want to set
up additional activation units (slaves).
To Next Page
Loading...
