WAVENET RADIO NETWORK 3065
Page 31
15.0 TECHNICAL DATA.
15.1 WaveNet plug-in power supplies
Order number WN.POWER.SUPPLY.PPP
Description Externally regulated 230V AC / 9V DC / 250 mA
Plug-in power supply for WaveNet central node, WaveNet
repeater node & WaveNet router node (PPP = Plug Power
Pack)
Order number WN.POWER.SUPPLY.LNC
Description Externally regulated 230V AC / 24V DC / 1.25A
Plug-in power supply only
for WN.LN.C, WN.RP.CC,
WN.RN.E(X) and
WN.RN.W(X) with various network adapters for UK/US/AU
15.2 WaveNet central node, RS232 connecting cable
Order number WN.CN.RS232.Cable
Description RS232 connecting cable between PC and WaveNet
central node
Length 2 m
Note: Versions of the housing shown as of 15.3 may vary from the original!
15.3 WaveNet central node, RS232 / RS 485 interface
Order number WN.CN.SC
Description WaveNet central node for connecting to a PC/server.
Central node with integrated RS485 interface for backbone
Dimensions (L*W*H) 100x65x40 mm (applies to all routers without antenna)
Power supply 9V ... 12 V DC regulated plug-in power supply
Output
(for all routers)
Min. 3 VA (250 mA with continuous load*)
* - Peak current with termination of both ends in backbone
To Next Page
Loading...