Simons Voss Technologies 3060 - Connection to LPI-10; (Version: Open PCB with External Plug-In Power Supply); Connection to LPI-10 Compact

LON – Network 3065
Page 6
1.2 Connection to LPI-10
(Version: Open PCB With External Plug-in Power Supply)
The LockNodes are connected to the CentralNode using a two-wire line (twisted pair).
The LPI-10 (version: open printed circuit board with external plug-in power supply)
provides the LockNodes with voltage over the same line.
1.3 Connection to LPI-10 Compact
The LockNodes are connected to the CentralNode using a two-wire line (twisted pair).
The LPI-10 (version: compact construction with 230V supply from the customer)
provides the LockNodes with voltage over the same line.