PinCode Keypad 3068
Page 9
4.3 Procedure
5.0 Deleting PINs
5.1 Description
To deactivate PINs again, follow these steps:
1. Press "0" to change to programming mode.
2. Enter the "master PIN ".
3. Press
• "1" for "PIN 1" or
• "2" for "PIN 2" or
• "3" for "PIN 3".
4. For the PIN length, enter "0".
5. If the input was correct, the PIN in question is deleted.
In this way, you can deactivate one or more PINs again. They can only be reactivated
if you program them again. If you do not need all the PINs, you can leave the extra
one unprogrammed.
Input "0"
Input "master PIN"
Input "2"
(for PIN 2)
Input PIN length
4, 5, 6, 7 or 8
Input "PIN"
Input "1
(for PIN 1)
Input "3"
(for PIN 3)
To Next Page
Loading...
