Simonsen S-310 - Call History; Drafts; III. Call History; My Folder

GSM Fixed Wireless Telephone User Manual
6
ii . iv Sent
At message list, press Select to read the message. And then p ress Option to
continue the next step.
Press Read to read the message.
Press Forward to do Edit receiver or Phonebook or S ave . You can also
Edit or Insert contact or save the content if you need.
Press Move to my folder to save the message into my folder .
Press Delete to delete the message.
Press Delete all to delete all the message s.
ii .v Drafts
When user edit a message, but this message is not sent, it will save to Drafts . At
m essage list, press Option to read the message. And then press Select to continue the
next step.
Press Read to read the message.
Press Edit to edit the message again.
Press Delete to delete the message.
Press Delete all to delete all the message s.
ii . vi My folder
User can save the messages which he or she like s.
ii . vii Settings
Before using message function, user need do some necessary settings. Entering
message Setting subm enu, the following submenus will be displayed:
ii . vii . i SMS Center
Please ask the NETWORK SERVICE PROVIDER for the message service center
number.
The operation step is to choose SMS Center submenu, a nd press Select , input the
message service center number, in the end press OK to finish setting.
ii . vii . ii Val i di t y per i od
In the valid period, SMS center keeps sending the message until it is receiv ed . V alid
period could be applied to all sent messages. User can set the valid period as 12 hours or
1day or 1 week or Max.
Note: The function needs the support of networks service provider.
ii . vii . iii St at us r epor t
If you enable Status report function, when you send out a message , message service
center return a report to tell you the mess a ge has sent out successfully.
ii . vii . iv Storage type
User ca n choose this function to save the message to SIM or Phone .
ii . viii V oice mail
Enable this function, user can listen or edit the voice mail.
ii . ix Storage status
Shows the status of space which used to store the message , user can see SIMFree ,
SIMTotal , PhoneFree and PhoneTotal .
iii. Call History