SIMPA RS10B - User Manual

Questions and Answers

L
Laurie EdwardsAug 8, 2025
How to fix SIMPA Water Heater when there is no hot water?
- T
  tammy66Aug 8, 2025
  If your SIMPA Water Heater isn't providing hot water, here are some things to check: * Ensure the gas meter valve and the appliance's gas supply valve are fully turned on. * If air is trapped in the gas pipe, turn off the hot water tap, wait 10 seconds, and then turn it back on. * Replace the batteries, as they may be consumed. * If the water supply pressure is too low, turn off the cold water valve, clean the filter, fully turn the cold water valve back on, and then turn on the hot water tap. * Clean the shower head if the holes are blocked. * Reduce the cold water flow if you're using a mixing-type faucet, as too much cold water can affect the hot water supply.
A
Amy MorrisAug 13, 2025
What to do if the battery replacement indicator lights up on my SIMPA Water Heater?
- J
  Jennifer GuerreroAug 13, 2025
  If the battery replacement indicator light is on, it means the batteries in your SIMPA Water Heater are consumed and you should replace them.
L
Laura WarnerAug 18, 2025
Why is my SIMPA Water Heater's hot water temperature too low?
- E
  Erica MooreAug 18, 2025
  If the hot water temperature from your SIMPA Water Heater is too low, check the following: * Ensure the gas supply valve of the appliance is fully turned on. * Adjust the flame control and water temperature control knobs to the proper settings.
P
patricia85Aug 23, 2025
What to do if the operation indicator goes off on my SIMPA Water Heater?
- J
  Jessica GlassAug 25, 2025
  If the operation indicator on your SIMPA Water Heater goes off, it could be due to ignition failure or flame failure during usage. First, turn off the hot water tap and confirm that the gas supply valve of the appliance is fully turned on. Then, turn the hot water tap back on. If the problem persists, no other solution is provided in the manual.
J
John ChapmanAug 28, 2025
How to adjust the hot water temperature if it is too high on a SIMPA Water Heater?
- D
  Derek ConnerAug 28, 2025
  If the hot water temperature from your SIMPA Water Heater is too high, adjust the flame control and water temperature control knobs to the proper settings.
O
ohernandezSep 2, 2025
What does it mean when the battery replacement indicator flashes on my SIMPA Water Heater?
- J
  Jason FoxSep 3, 2025
  When the battery replacement indicator flashes on your SIMPA Water Heater, it indicates a low battery level. The appliance can still be operated, but you should prepare new batteries.