8
(1) Starting use of appliance
• Appliance operates immediately when the hot water tap is
fully turned on.
(2) Using hot water
• After turning on hot water tap, burner will be ignited
automatically and hot water will be supplied. Operation
indicator lights up simultaneously.
• Hot water tap should not be turned on insufficiently.
Otherwise, ignition may fail or the flame may extinguish
during use.
(3) Adjusting temperature of hot water
• Temperature of hot water can be adjusted by flame control
knob and water temperature control knob.
• Flame control knob
Turn the knob to adjust flame power. With the output water
volume unchanged, turning the knob in anti-clockwise
direction to increase hot water temperature; while turning
the knob in clockwise direction to decrease hot water
temperature. Range of adjustment of flame power is Small
Flame(小火)-Large Flame(大火). Icon beside the knob
with “Small Flame(小火)” is the lowest flame power. Icon
beside the knob with “Large Flame(大火)” is the highest
flame power.
• Water temperature control knob
Turn the knob to adjust water temperature. Turning the
knob in clockwise direction to increase hot water
temperature; while turning the knob in anti-clockwise
direction to decrease hot water temperature. Range of
adjustment of water temperature is Low(低)-1-2-3-4-5-
High(高). Icon beside the knob with “Low(低)” is the lowest
water temperature. Icon beside the knob with “High” is the
highest water temperature.
(4) Stopping use of hot water
• Appliance stops operation immediately and hot water will
stop supplying when the hot water tap is turned off.
Operation indicator goes out simultaneously.
• To use hot water again, repeat step (1) to (3).
Use of Appliance
Operating Instructions
Turn on hot
water tap
Operation indicator
Water tap
fully turn on
Water tap turn
on insufficiently
Flame
control knob
Water Temperature
control knob
Turn off hot
water tap
To Next Page
Loading...
