Step 1. Mount your BluStream module (a) with the included adhesive tape to your vehicle’s dash
Step 2. BluStream needs a little power to rock your world, so plug the power source (b) into your
12volt power outlet (cigarette port)
Step 3. Plug the 3.5mm AUX cable (c) to your vehicle’s AUX port.
Step 4. Change your input source on your car radio to AUX Input
Step 5. Pair your Bluetooth capable smartphone to Bluestream!
How to pair your phone:
•Ensure your smartphone's Bluetooth is on
•Select “BluStream” from your phone’s Bluetooth list and select connect
(No Pairing Code is required)
Initial Setup
BluStream is an easy to use, Bluetooth, hands-free calling
and audio streaming solution for your vehicle.
What you will need for this install:
• Smartphone with Bluetooth
• 12volt power outlet aka your vehicle’s cigarette lighter port
• Car radio
• Your vehicle’s AUX port
INSTRUCTIONS
BluStream - ISBT52
What’s in the box!
12V power source (b)
3.5mm AUX jack
(c)
(green button and visor clip for
professional installations only)
button (a)
BluStream module with control
Step 2
Step 3 Step 4
Step 5Step 1
DIY Install Instructions
Optional
To Next Page
Need help?
General
