4100/4120-Series and 4010ES Relay Modules
Installation Instructions
© 2002 -2011 SimplexGrinnell LP. All rights reserved.
Specifications and other information shown were current as of publication and are subject to change without notice.
Simplex and the Simplex logo are trademarks of Tyco International Ltd. and its affiliates and are used under license.
579-220
Rev. D
This publication describes the installation procedure for the relay cards listed in the following
table.
Model Number Description Required Backbox
4120-3001 4 Relay/2 Amp 2975-91xx Back Box (4100)
4100-3204/
4100-3201
4 Relay/2 Amp 2975-94xx Back Box (4100U/4100ES)
4010-9908 4 Relay/2 Amp 4010ES Back Boxes
4120-3002 4 Relay/10 Amp 2975-91xx Back Box (4100)
4100-3202 4 Relay/10 Amp 2975-94xx Back Box (4100U/4100ES)
4120-3003 8 Relay/3 Amp 2975-91xx Back Box (4100)
4100-3206/
4100-3203
8 Relay/3 Amp 2975-94xx Back Box (4100U/4100ES)
• Field Wiring Diagram for 4100 Power Limited (841-731) or,
• Field Wiring Diagram for 4100 Non Power Limited (841-995)
• 4100ES Fire Alarm System Installation Guide (574-848)
• 4010ES Fire Alarm System Installation Guide (579-989)
This publication discusses the following topics:
Topic See Page #
Cautions and Warnings 2
Overview 3
Setting Switches 4
Installing Motherboards into 2975-91xx Back Boxes (4100) 6
Installing Boards into 2975-94xx Back Boxes (4100U/4100ES) 10
Installing Boards into 4010ES Back Boxes
16
Installing the Daughter Card (4100 series only) 17
Wiring 18
Introduction
Related
Documentation
In this Publication
To Next Page
Need help?
General
