Why is the 'Gen Power' light on my Simplex 4007ES yellow?
The 'Gen Power' indication on your Simplex Fire Alarm system, when steadily illuminated in yellow, typically signals several potential issues: * AC power loss. * Earth fault. * Overcurrent. * Battery trouble.
What does 'NAC 1, 2, 3, 4 Overcurrent, Short, and Open Circuit' mean on Simplex Fire Alarms?
The 'NAC 1, 2, 3, 4 Overcurrent, Short, and Open Circuit' indication on your Simplex Fire Alarms system, when steadily illuminated in yellow, signals overcurrent, short, and open circuit.
What does 'RUI OC' mean on Simplex 4007ES?
The 'RUI OC' indication on your Simplex Fire Alarms system indicates a short (overcurrent).
General| Model | 4007ES |
|---|---|
| Category | Fire Alarms |
| Operating Temperature | 32°F to 120°F (0°C to 49°C) |
| Humidity Range | Up to 93% RH, non-condensing |
| Display | 4.3-inch color touchscreen |
| Power Supply | 120/240 VAC, 50/60 Hz |
| Network Connectivity | Ethernet, RS-232, RS-485 |
| Addressable Points | 250 |
| Communication Protocols | MAPNET II |
| Notification Appliance Circuits | 4 NACs |
| Total Points | 250 |
| Annunciation | Yes |
| Max Devices | 250 |
| Max Notification Circuits | 4 |
| Communication Ports | RS-232, USB |
Highlights critical safety warnings for installation and operation, including electrical and static hazards.
General guidelines for connecting power-limited systems and proper system grounding.
Procedures for connecting AC power and guidelines for installing backup batteries.
Steps to finalize the installation, including reinstalling components and powering up the system.
Information on wiring parameters, maximum distances, and cable load for NAC circuits.
Instructions for connecting notification appliances using Class A and Class B wiring styles.
Defines indicator LEDs on the NAC power supply and troubleshooting common issues.
Information on wiring parameters, channel loading, and distance limits for IDNAC circuits.
Defines indicator LEDs and SLC channel trouble codes for the IDNAC power supply.
Details the IDNet channel, its specifications, and device addressing methods.
Explains IDNet wiring parameters, capacitance limits, and Class A/B wiring configurations.
Covers RUI channel support, specifications, and wiring for RUI devices.
Details system indicator LEDs, trouble messages, and troubleshooting steps for the power supplies.
To Next Page
