To Next PageTo Next Page
Need help?Do you have a question about the Simplex 4001-9403 and is the answer not in the manual?
General| Brand | Simplex |
|---|---|
| Model | 4001-9403 |
| Category | Fire Alarms |
| Language | English |
Explains the basic components and function of the 4001-9403/9404 fire alarm panels.
Lists all necessary tools and equipment for installing the fire alarm system.
Provides essential general notes and guidelines for the installation process.
Details general requirements and specifications for system wiring, including power and grounding.
A step-by-step checklist to ensure all installation procedures are correctly followed.
Step-by-step instructions for physically mounting the fire alarm control panel.
Guidance on installing and wiring peripheral devices like detectors and pull stations.
Procedure to check building wiring for voltage, shorts, and opens before system activation.
Detailed instructions for making electrical connections to the control panel terminals.
Terminal connection details for optional suppressor or disconnect boards.
Explains how to program system options using DIP switch package SW1.
Steps to safely apply power to the system and observe initial indicator status.
How to interpret normal, trouble, and alarm indications on the panel LEDs.
Procedures for silencing notification appliances and acknowledging alarms.
Steps to reset the fire alarm system after an alarm condition is cleared.
Specific instructions for operating the system during sprinkler water flow events.
Guidance on handling and correcting system trouble conditions.
A table correlating common symptoms with corrective actions for troubleshooting.
Recommendations for annual battery testing and replacement of sealed lead-acid batteries.
Procedure for testing battery capacity using a voltmeter and resistors.
