Need help?Do you have a question about the Simplex 4098-9614 and is the answer not in the manual?
General| Model | 4098-9614 |
|---|---|
| Category | Fire Alarms |
| Operating Voltage | 24 VDC |
| Color | White |
| Humidity Range | 10% to 93% non-condensing |
| Compatibility | Simplex 4100ES |
| Communication Protocol | IDNet |
| Mounting | Surface |
Inspect Simplex products for shipping damage upon unpacking; file claims if apparent.
Safety guidelines for electrical hazards and static discharge during installation and component handling.
Guidelines for eye safety with fiber optics and safe handling of sulfuric acid from batteries.
FCC Part 15 compliance requirements and system recertification needs after software modifications.
Factors influencing detector placement like occupancy, construction type, and air movement.
Guidelines for correct and incorrect placement of detectors and sensors, including ductwork.
Explains the working principles of heat, photoelectric smoke, and carbon monoxide detectors.
Details on limitations, specifications, and mounting requirements for 4098 smoke detectors.
Information on heat detector types, their specifications, and features.
Instructions for mounting and wiring the 4098 detector bases.
General information, sensitivity settings, and spacing recommendations for TrueAlarm sensors.
Specs, special applications, and mounting for 4098 TrueAlarm sensors.
Specs, address setting procedures, and wiring for TrueAlarm sensor bases.
Instructions for wiring and installing various relay modules for detector bases.
Steps for installing the 2098-9808 Remote LED Module for compatible sensor bases.
Compatibility charts detailing interaction between detectors, sensors, bases, and FACPs.
Procedures for sensor cleaning, testing methods, equipment, and trouble indications.
To Next Page
