Simplex 4098-9687 - Template

POSITION 3
TOP
HOLES MARKED "A" ARE FOR SAMPLING AND
EXHAUST TUBES. HOLES ARE 1 5/16" INCH (33.32mm)
A
A
POSITION 1 AND 2
TOP
DETECTOR
PCB
DETECTOR
PCB
DETECTOR
PCB
DETECTOR
PCB
POSITION 1
POSITION 3
CUT
NOT ALLOWED
POSITION 2
Figure 14. Stand Alone Duct Detector Mounting Template
Cut and tape Template to the Duct Surface. Refer to
the Duct Housing Installation Section (Pages 8-12).
PREFERRED
firealarmresources.com