Simplex 4100-1314 - Page 2

100 W Amplifiers Compatible with CSNAC Option
Note: The following PIDs (example: 4100-1314) are compatible with all options (includes the CSNAC option)and 4100U Master Firmware Rev. 11.08 or
later).
Analog Amps:
• 4100-1314 100 W Amp – 120 VAC, 25 VRMS
• 4100-1315 100 W Amp – 120 VAC, 70 VRMS
• 4100-1316 100 W Amp – 120 VAC, 25 VRMS – Canada
• 4100-1317 100 W Amp – 120 VAC, 70 VRMS – Canada
• 4100-1318 100 W Amp – 220/230/240 VAC, 25 VRMS
• 4100-1319 100 W Amp – 220/230/240 VAC, 70 VRMS
• 4100-1320 Backup 100 W Amp – 120 VAC, 25 VRMS
• 4100-1321 Backup 100 W Amp – 120 VAC, 70 VRMS
• 4100-1322 Backup 100 W Amp – 120 VAC, 25 VRMS – Canada
• 4100-1323 Backup 100 W Amp – 120 VAC, 70 VRMS – Canada
• 4100-1324 Backup 100 W Amp – 220/230/240 VAC, 25 VRMS
• 4100-1325 Backup 100 W Amp – 220/230/240 VAC, 70 VRMS
Digital Amps:
• 4100-1328 100 W Amp – 120 VAC, 25 VRMS
• 4100-1329 100 W Amp – 120 VAC, 70 VRMS
• 4100-1330 100 W Amp – 120 VAC, 25 VRMS – Canada
• 4100-1331 100 W Amp – 120 VAC, 70 VRMS – Canada
• 4100-1332 100 W Amp – 220/230/240 VAC, 25 VRMS
• 4100-1333 100 W Amp – 220/230/240 VAC, 70 VRMS
• 4100-1334 Backup 100 W Amp – 120 VAC, 25 VRMS
• 4100-1335 Backup 100 W Amp – 120 VAC, 70 VRMS
• 4100-1336 Backup 100 W Amp – 120 VAC, 25 VRMS – Canada
• 4100-1337 Backup 100 W Amp – 120 VAC, 70 VRMS – Canada
• 4100-1338 Backup 100 W Amp – 220/230/240 VAC, 25 VRMS
• 4100-1339 Backup 100 W Amp – 220/230/240 VAC, 70 VRMS
page 2 579-174 Rev. Q
Digital/Analog Amplifiers Installation Instructions