TYPE 4208 FIRE ALARM SYSTEM
INTRODUCTION
The Type 4208 Fire Alarm System consists of a combination of various panels, modules and peripheral
equipment that is designed to meet a customer’s particular fire protection requirements.
The “A” and “AX” panels are the control units of the system.
They provide the power to operate the
alarm, supervision and trouble circuits.
The “A” panel automatically transfers to standby battery power if
an AC power failure occurs.
Power Requirements
The Type 4208 System operates on 1 lSVAC, 50-60Hz, with 230VAC operation available on request.
The system is also adaptable to other power requirements, if required.
CAUTION
ELECTRICAL HAZARD
Remove power when making any internal adjustments or repairs.
Installation and servicing should be performed by qualified technicians.
To Next Page
Loading...
Need help?
General
