2
1 WARNINGS AND CAUTIONS
Safety
InformatIon
SymbolS
e following images indicate important safety
information:
is General warning symbol points out
important information that, if not followed,
could endanger personal safety and/or
property.
is Explosion warning symbol points out
potential explosion hazards.
is Fire warning symbol points out poten-
tial re hazards.
is Electrical warning symbol points out
potential electrical shock hazards.
• Improper operation of this equipment such as
neglecting its maintenance or being careless
can cause possible injury or death. Permit only
responsible and capable persons to install, operate,
and/or maintain this equipment.
• Potentially lethal voltages and amperages are pres-
ent in these machines. Ensure all steps are taken
to render the machine safe before attempting to
work on the equipment.
• All hardware covered by this manual have
dangerous electrical voltages and can cause fatal
electrical shock. Avoid contact with bare wires,
terminals, connections, etc., on the hardware, if
applicable. Ensure all appropriate covers, guards,
grounds, and barriers are in place before operat-
ing the equipment. If work must be done around
an operating unit, stand on an insulated dry
surface to reduce shock hazard.
• Do not handle any kind of electrical device while
standing in water, while barefoot, or while hands
or feet are wet. DANGEROUS ELECTRICAL
SHOCK MAY RESULT.
• If trained personnel must stand on metal or
concrete while installing, servicing, adjusting, or
CautIonS
To Next Page
Loading...
Need help?
General
