STRAIGHT STITCH AND ZIGZAG STITCH
Starting To Sew
1. Be sure both the threads are drawn back under the presser foot
2. While holding the threads with your left hand, turn the balance
wheel towards you to bring the needle into the fabric where you
wish to start sewing.
3. Lower the presser foot, and gently depress the foot control until
you reach the desired sewing speed.
*Sew a few reverse stitches by pushing reverse button for
reinforcing the end of seams.
*Raise the needle to its highest position before turning the pattern
selector dial and stitch width dial.
Retyped by Mastersewusa.com 21
To Next Page
Loading...
