Control Single Lever, Release
Lever for Manual Tractor Movement,
Continuously Variable, Forward & Reverse,
without Braking
Speeds Forward: 0 - 5.5 MPH (0 - 8 km/h)
@3400 RPM Reverse: 0 - 3.5 MPH (0 - 5.6 km/h)
Differential Automotive Type
CONTROLS
Steering Full Circle Steering Wheel
System Gear and Sector
Clutch/ Location Right Front
Brake Pedal Combination Clutch/Brake/Parking Brake
Pedal Standard Equipment
Location Mower Lift Lever Right Side, Lower
Dash Tower
PTO Clutch Electric, Dash Mounted
Ground Speed Lever Dash Mounted
Ignition Key Switch on dash panel
Throttle Lever and Choke Lever on dash panel
Light Switch on dash panel
Separate Indicator Lights for Safety
Interlock Switch Operator Present,
Transmission Neutral, PTO Disengaged,
Clutch/Brake Pedal Depressed
Low Oil Pressure Warning Light
CHASSIS
Frame Heavy Gauge Steel Channel
Power Take-Off Point Front
Engine Mounting Above Front Axle
Pivot Point Location Front Axle
Rear Wheels Tire Size 20 x 8.00-8 Turf Type
Pneumatic Inflation Pressure 6-8 psi (41-55 kPa)
Front Wheels Tire Size 15 x 6.00-6
Pneumatic Inflation Pressure 12-15 psi
(82-103 kPa)
Front Axle 1-3/4” x 3” 12 Ga. Fabricated Rectangular Tube
Accessibility Hood Tips Forward
Seat Type Bucket, High Back, Adjustable w/
Spring Suspension
Adjustable to Suit Different Size Operators
Turning Radius Inside Rear Tire 16 In. (40.6 cm)
DIMENSIONS
Tractor
Overall Length 67 In. (170.2 cm)
Overall Width 35 In. (88.9 cm)
Height To Top of Steering Wheel 40 In. (1016 cm)
To Top of Engine Cover 34 In. (86.7 cm)
Wheel Base 48 In. (121.9 cm)
Weight (approx.) Net: 455 Ibs. (206 kg)
without mower Shipping: 575 Ibs. (261 kg)
Mower - 38" Deck
Effective Cutting 38 In. (96.5 cm)
Width
Overall Width 49.5 In. (125.7 cm)
with Deflector
Weight 100 Ibs. (45 kg)
Variable Cutting Ht. 10 - 3.6 In (2.5 to 9.1 cm)
Blade Arrangement Two Blades
Mower Drive V-Belt From Tractor PTO Pulley
Spindle Bearings Lubricated and Sealed Ball Bearings
Mower - 44” Deck
Effective Cutting 44 In. (1118 cm)
Width
Overall Width 56 In. (142.2 cm)
with Deflector
Weight 115 Ibs. (52 kg)
Variable Cutting Ht. 1- 3.6 In. (2.5 to 91 cm)
Blade Arrangement Three Staggered Blades
Mower Drive V-Belt From Tractor PTO Pulley
Spindle Bearings Lubricated and Sealed Ball Bearings
35
Specifications