Simplicity S20EZM User Manual

Always operate the vacuum with a vacuum bag
installed� Bags should be changed when they
are 2/3 full�
1� Unplug the vacuum� Remove the bag
compartment cover (Fig�1)�
2� Remove the bag by grasping the sides of the
bag collar and pulling straight off� Attach a
new vacuum bag by pushing the collar onto
the inlet(Fig� 2)�
3� Pull out the bottom corners of the new bag
to expand the bag capacity (Fig� 3)�
4� Insert the bottom of the bag compartment
cover into the groove on the bag
compartment housing� Press the bag
compartment cover into place, closing
ittightly�
Fig� 2
Fig� 1
Fig� 3
How to Adjust the
Nozzle Height
When the vacuum handle is
reclined, rotate the height
adjustment dial to the type of
floor being vacuumed (Fig� 1)�
Fig� 1
The edge cleaning feature provides improved cleaning of carpets near walls and
stationary furniture� For maximum edge cleaning, position the right side of the
vacuum from the user’s perspective near walls or stationary furniture�
Fig� 1
The full bag indicator changes to red when the bag is full or when
there is a clog in the vacuum�
• If the red indicator appears:
• Change the vacuum bag�
• If the vacuum bag is not full check the hose for a clog�
• When cleaning with a tool (dusting brush or crevice tool), the
red indicator may appear� In this case, continue cleaning�
Settings for the
floor brush height adjustment dial
Shag/
Frieze
Carpet
Plush
Carpet
Medium
Pile
Carpet
General
Setting
Low
Pile
Carpet
& Bare
Floors
HOW TO ADJUST THE HEIGHT
EDGE CLEANING FEATURE
FULL BAG INDICATOR
HOW TO CHANGE THE VACUUM BAG
6

Simplicity S20EZM Specifications

General

Brand	Simplicity
Model	S20EZM
Category	Vacuum Cleaner
Language	English