SimpliSafe Base Station Setup Guide

Have questions? Call 0800 920 2420
15
The siren
sounds when
one of your
sensors is
triggered.
The operator
will contact you
and others you
designate.
If the operator
confirms an
emergency at
your home,
emergency
responders will
be dispatched.
Your Base
Station then
wirelessly
contacts the
monitoring
center.
1. When your alarm is on and one of your sensors is triggered, the Keypad will
start beeping and prompt you for your PIN. You have 30 seconds to turn the
alarm o—this time is called the Entry Delay and can be customized in the
Keypad menu.
2. If the alarm is not turned o within the 30 second Entry Delay, SimpliSafe will
sound a siren for four minutes and send an alert signal to our Emergency
Dispatch Center (you must activate your service in your online account for this
service to function).
3. Upon receiving the signal, the Dispatch Center will attempt to contact you.
4. If it was a false alarm and you provide your previously chosen Safeword, no
authorities will be dispatched.
5. If it is a confirmed emergency, they will immediately dispatch emergency
responders to your protected location.
6. Your alarm system will automatically re-arm, but the sensor that caused
the burglar alarm will be disabled until the alarm system is dis-armed and
re-armed again.
How Monitoring Works
What happens when a sensor is triggered?

SimpliSafe Base Station Specifications

General

Connectivity	Wi-Fi, Cellular
Backup Battery Life	24 hours
Color	White
Siren	95 dB
Power Source	AC Power
Compatibility	SimpliSafe security devices