SimpliSafe Water Sensor

Owner’s Manual
The Keychain Remote contains the SimpliSafe
Easy Setup Wizard – a software program that
provides animated instructions and lets you
customize your system most easily.
•Insert the Keychain Remote into a USB port on a
computer. No software will be installed.
•The Easy Setup Wizard will automatically appear.
Tip: If the welcome screen does not appear,
open “My Computer” on your desktop and look
for the “SimpliSafe” drive. On the drive, open the
“SimpliSafe” application.
•Follow the on-screen instructions.
If you don’t have access to a computer, just follow
the instructions in this Owner’s Manual.
Two options for getting started:
1
2

SimpliSafe Water Sensor Specifications

General

Type	Water Sensor
Compatibility	SimpliSafe security system
Power Source	Battery
Battery Type	CR2032
Connectivity	Wireless
Detection	Water leakage
Placement	Near potential water sources (e.g., under sinks, near water heaters)
Alerts	Mobile app notifications, system alerts
Operating Temperature	32°F to 104°F (0°C to 40°C)
Operating Humidity	Up to 85% non-condensing
Wireless Range	800 feet open air

Summary

Plan Your Installation

Install Your Security System: Base Station

Install Your Keypads

Install Your Motion Sensors

Install Your Glassbreak Sensors

Install Your Entry Sensors

Install Your Panic Buttons

Install Your 105 Decibel Sirens

Install Your Carbon Monoxide Detector

Install Your Smoke Detectors

Install Your Freeze Sensors

Install Your Water Sensors

Personalize Settings

Activate Your Alarm Monitoring Service

Steps to activate your subscription for professional monitoring and dispatch.

Change Your PIN

Guide to changing the default 4-digit PIN for system access and security.

How 247 Alarm Monitoring Works

What Happens When a Sensor is Triggered

Details the alarm sequence, entry delay, and dispatch procedures when a sensor is triggered.

Use Your System

Turn Your Alarm ON

Guides on arming the system in Away and Home modes for security.

Turn Your Alarm OFF

Instructions for disarming the system using the Keypad or Keychain Remote.

Test Your System

Test Your Sensors

Steps to test each sensor to confirm its proper operation and communication.

Troubleshooting

Product Safety and Limited Warranty

Product Safety Information

Essential safety guidelines for operating the SimpliSafe system and its components.