SimpliSafe Water Sensor User Manual

`
visit www.simplisafe.com or call 1-888-95-SIMPLI (957-4675) for additional assistance
13
Install your Freeze Sensors
•Remove the battery activation strip.
•Adhere Freeze Sensor on the wall near your
home’s main thermostat.
!
Tip: Most homeowner’s insurance companies will give you an extra discount
for having Freeze Sensors installed. Contact your insurance agent for details.
Consider placing one close to
exposed plumbing vulnerable to
bursting during a freeze: such
as in bathrooms and kitchens.
Place near your home’s main
thermostat to track household
temperature.
Avoid your boiler room, which may
stay warm long after a furnace failure.

SimpliSafe Water Sensor Specifications

General

Type	Water Sensor
Compatibility	SimpliSafe security system
Power Source	Battery
Battery Type	CR2032
Connectivity	Wireless
Detection	Water leakage
Placement	Near potential water sources (e.g., under sinks, near water heaters)
Alerts	Mobile app notifications, system alerts
Operating Temperature	32°F to 104°F (0°C to 40°C)
Operating Humidity	Up to 85% non-condensing
Wireless Range	800 feet open air