SimpliSafe Water Sensor User Manual

visit www.simplisafe.com or call 1-888-95-SIMPLI (957-4675) for additional assistance
7
Install your Glassbreak Sensors
•Remove the battery activation strip.
•Adhere the Glassbreak sensor close to a
bank of windows or on a wall facing your
windows.
•You can install it up to 20 feet away from the
windows you’d like to protect.
Helpful Information about your Glassbreak Sensor
•Glassbreak Sensors are programmed to “listen” for the
specific frequency of glass breaking.
•Avoid placing your Glassbreak Sensor in the kitchen, as
glasses knocking into each other could trigger a false alarm.
Tip: Curtains can dull the sound of glassbreaking.
If your windows are covered in heavy curtains,
place your Glassbreak Sensor within 5-10 feet of
your windows.
Max Distance: 20 Feet

SimpliSafe Water Sensor Specifications

General

Type	Water Sensor
Compatibility	SimpliSafe security system
Power Source	Battery
Battery Type	CR2032
Connectivity	Wireless
Detection	Water leakage
Placement	Near potential water sources (e.g., under sinks, near water heaters)
Alerts	Mobile app notifications, system alerts
Operating Temperature	32°F to 104°F (0°C to 40°C)
Operating Humidity	Up to 85% non-condensing
Wireless Range	800 feet open air