SimpliSafe Water Sensor User Manual

visit www.simplisafe.com or call 1-888-95-SIMPLI (957-4675) for additional assistance
12
`
•Remove the battery activation strip
•Install a Smoke Detector near your
sleeping areas. For maximum protection
install one on each level of your home.
•Remove mounting bracket from the Smoke
Detector by rotating it counterclockwise.
•Install the bracket on the wall or ceiling
using the included screws and wall
anchors.
Install your Smoke Detectors
Do not install near your
furnace, stove, fireplace,
kitchen or garage, or
bathroom with a shower.
!
Make sure to place a Smoke
Detector near your sleeping areas.
For maximum protection place one
on each level of your home.
•Push the Smoke Detector against the mounting bracket
and rotate it clockwise until it snaps into place. Pull gently
on the detector to make sure it’s securely attached.
Mounting
Bracket

SimpliSafe Water Sensor Specifications

General

Type	Water Sensor
Compatibility	SimpliSafe security system
Power Source	Battery
Battery Type	CR2032
Connectivity	Wireless
Detection	Water leakage
Placement	Near potential water sources (e.g., under sinks, near water heaters)
Alerts	Mobile app notifications, system alerts
Operating Temperature	32°F to 104°F (0°C to 40°C)
Operating Humidity	Up to 85% non-condensing
Wireless Range	800 feet open air