Have questions? Call 0800 920 2420
21
Warning: Changes or modifications to this unit not expressly approved by SimpliSafe ltd could void the user’s authority to operate the
equipment.
Use only approved batteries and the supplied UL/ULC/EN approved power adapter with your SimpliSafe Home Security System. Any
tampering with the product or other unauthorized use will void your limited warranty. To prevent a fire hazard or electrical shock, do
not expose the Base Station (SSBS3) or other components to water or operate the System while you are wet or standing in water. Be
sure that electrical and telephone cords used are not frayed or placed in a location where they can pose a danger.
Caution: To ensure proper operation, this equipment must be installed according to the enclosed installation instructions. To verify that
the equipment is operating properly and can successfully report an alarm, this equipment must be tested immediately after
installation, and periodically thereafter, according to the enclosed test instructions (pages 17-18).
Caution: Please verify periodically that components remain firmly adhered. A falling component could harm a passing person. Also,
swallowing a small piece, such as a magnet or battery could be harmful. Please keep them away from children.
CAUTION: Risk of explosion if battery is replaced by an incorrect type. Displose of used batteries according to the instructions.
For the purpose of LVD Directive: Importer/Manufacturer: SimpliSafe ltd Address: Link 665 Business Centre Todd Hall Road Haslingden
Rossendale BB4 5HU
Operating Temp:
Power Supply:
Batteries:
Base Station: Model SSBS3 Operating Temperature 0°C to 40°C, 90% Max. Humidity
Keypad: Model SSKP3 Operating Temperature 0°C to 60°C, 90% Max. Humidity
Keyfob: Model SSKF3 Operating Temperature 0°C to 60°C, 90% Max. Humidity
Entry Sensor: Model SSES3 Operating Temperature 0°C to 60°C, 90% Max. Humidity
Motion Sensor: Model SSMS3 Operating Temperature 0°C to 60°C, 90% Max. Humidity
Panic Button: Model SSPB3 Operating Temperature 0°C to 60°C, 90% Max. Humidity
Glassbreak Sensor: Model SSGB3 Operating Temperature 0°C to 60°C, 90% Max. Humidity
Smoke Detector: Model SSSD3-0 Operating Temperature 0°C to 60°C, 90% Max. Humidity
Carbon Monoxide Detector: Model SSCO3-0 Operating Temperature 0°C to 60°C, 90% Max. Humidity
Water Sensor: Model SSWT3 Operating Temperature 0°C to 60°C, 90% Max. Humidity
Freeze Sensor: Model SSFS3 Operating Temperature 0°C to 60°C, 90% Max. Humidity
Extra Siren: Model SSWS3 Operating Temperature 0°C to 60°C, 90% Max. Humidity
SimpliCam: Model SSCM1 Operating Temperature -10°C to 40°C, 90% Max. Humidity
Input: 100-240 VAC, 50/60Hz, 0.4A Max, Output: 6.5VDC, 1.6A
DONGGUAN GANGQI ELECTRONIC CO LTD, GQ12-065160-AB
Base Station: Four(4) Eneloop BK-3MCCA, 1.2V min 1900mAh OR FB 1000, 1.2V, 1000mAh, NiMh (Note: NiMh
batteries must be recycled or disposed of properly).
Keypad: four 1.5V Alkaline, size AA.
Motion, Glassbreak Sensors: one 3V Lithium, size CR123A.
Panic Button, Freeze, Water Sensors, Entry Sensors: one 3V Lithium, size CR2032.
Product Safety Information
SimpliSafe may occasionally receive optional system updates to add features and
functionality. If your system is connected to wifi and there is an update available, you will
see a gear symbol on the left side of your Keypad’s screen. Press the o button to
refresh your Keypad’s screen to determine if an update is available. To accept the update,
follow the prompts and wait for your Base Station and Keypad to reboot. The update
process may take between 10 and 20 minutes, during which your system will be oine.
After the update is complete, you will have to select the gear icon on each additional
Keypad you own to update them as well.
System Updates
To Next Page
Loading...
Need help?
General
