Simpson MSH3224 - QUICK SETUP GUIDE; QUICK START GUIDE; INITIAL CONNECTION AND STARTUP STEPS

QUICK SETUP GUIDE
& WARNING: To reduce the risk of injury, read the pressure washer instruction manual and
the en ine instruction manual before o erati ressure washer.
0
Install the Handle
Slide the handle
assembly onto the
frame. Align holes in the top
handle with the mounting
holes in the handle
assembly. Secure with
saddle bolts and knobs.
&DANGER:
0
Add/Check Oil
The engine is
shipped without
oil. Before starting engine,
add the oil provided.
Check oil level prior to
each use. Refer to Engine
Owner's Manual for
complete procedure.
QUICK START GUIDE
•
Add Gasoline
In a well ventilated
outdoor area
add fresh, high quality,
unleaded gasoline with a
pump octane rating of
86
or higher. Do not overfill.
Wipe up spilled fuel before
starting the engine. Refer
to Engine Owners Manual
for complete procedure.
• Never run engine indoors or in enclosed, poorly ventilated areas. Engine exhaust
contains
carbon monoxide, an odorless and deadly gas.
• Risk of fluid injection and laceration. When using the high-pressure setting, DO NOT
allow the high-pressure spray to come in contact with unprotected skin, eyes or with
any pets
or animals. Serious injury will occur.
0
Connect Garden
Hose to Pump
Thread the garden
hose to the pump inlet.
See Label#1 on the pump.
0
Connect High
Pressure Hose to
Pump
Thread the high pressure
hose to the pump outlet.
See Label #2 on the pump.
[I]
8- ENG
•
Connect High
Pressure Hose to
Spray Gun
Thread the other end of
the
high pressure hose
to the spray gun.