EasyManua.ls Logo

Simpson S2700H - User Manual

Simpson S2700H
44 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
INSTRUCTION MANUAL
MANUAL DE INSTRUCCIONES
MODELS
MODELO
Part No. 7104770 Rev. 0 JULY 2011
If your pressure washer is not working properly or if there are parts missing or
broken, please DO NOT RETURN IT TO THE PLACE OF PURCHASE. Contact our
customer service department at www.simpsoncleaning.com.
Si su lavadora a presión no trabaja correctamente ó encuentra partes rotas
ófaltantes, por favor NO LA REGRECE AL LUGAR DONDE LA COMPRO.
Contáctese con nuestro Departamento de Servicio al Cliente llamando al
www.simpsoncleaning.com.
SAVE THIS MANUAL FOR FUTURE REFERENCE
2700 PSI
2.3 GPM
IMPORTANT: Please make certain that the person who is to use this equipment
carefully reads and understands these instructions before operating.
IMPORTANTE: Aségurese por favor de que la persona que vaya a utilizar este
equipo lea con cuidado y comprenda estas instrucciones antes de operar.
VEA EL ESPAÑOL EN LA CONTRAPORTADA. INSTRUCTIVO DE OPERACIÓN,
CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA. ADVERTENCIA:
LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
PREMIUM PRESSURE WASHER
S2700H

Table of Contents

Questions and Answers

  • P
    Philip SmithAug 6, 2025
    What to do if my Simpson Pressure Washer has no or low pressure?
    • F
      Fernando SandersAug 6, 2025
      To resolve low or no pressure during initial use of your Simpson Pressure Washer: * Ensure the spray wand is set to high pressure. * Confirm the water supply provides at least 5 gpm at 20 psi. * Check for and repair any leaks at the high-pressure hose fitting, applying sealant tape if needed. * Clean any obstructions from the nozzle. * Remove and clean the water filter screen. * Eliminate air from the hose by disconnecting the water source, turning it on to flush out air, then reconnecting and squeezing the trigger. * Ensure the high-pressure hose is under 100 feet (30 m).
  • J
    julia80Aug 13, 2025
    Why is my Simpson S2700H not drawing chemicals?
    • N
      Nicole FrenchAug 14, 2025
      To fix a Simpson Pressure Washer that won't draw chemicals: * Ensure the spray wand is set to low pressure. * Clean the chemical filter. * Make sure the detergent siphon hose is fully submerged in the cleaning solution. * Dilute the chemical if it's too thick, aiming for a water-like consistency. * Use a longer water supply hose instead of a high-pressure hose.
  • P
    Paula WhiteheadAug 21, 2025
    How to fix water leaking at gun/spray wand connection on Simpson Pressure Washer?
    • T
      tnealAug 21, 2025
      If water is leaking at the gun/spray wand connection of your Simpson Pressure Washer, check for worn or broken o-rings and replace them. Also, make sure the hose connection is tightened properly.
  • T
    Thomas BruceAug 28, 2025
    What to do if water leaking at pump of Simpson S2700H Pressure Washer?
    • T
      Timothy OliverAug 28, 2025
      If water is leaking at the pump of your Simpson Pressure Washer, tighten any loose connections. For worn piston packings, worn or broken o-rings, or a pump head/tubes damaged from freezing, further assistance is needed.

Summary

GET TO KNOW THE PRESSURE WASHER

BASIC ELEMENTS OF A PRESSURE WASHER

Identifies key components like pump, engine, hose, gun, and wand.

PRESSURE WASHER OPERATING FEATURES

PRESSURE ADJUSTMENTS

Details methods to adjust pressure, like changing distance or nozzle.

HOW TO USE SPRAY WAND

Guide to selecting and using spray nozzles based on color, pattern, and surface.

CHANGING NOZZLES ON SPRAY WAND

HOW TO APPLY CHEMICALS;CLEANING SOLVENTS (FIG. 7)

STARTING (FIG. 8-11)

WARNING: Risk of Fire, Asphyxiation and Burn.

Crucial safety precautions for fueling and engine exhaust.

NOTICE: Risk of property damage.

Warning against moving the washer by pulling the water supply hose.

SHUTTING DOWN

NOTICE: Risk of property damage.

Important warning about turning off the water supply while the engine is running.

MAINTENANCE

ENGINE

Directs users to the engine manual for maintenance advice.

PUMP

States the pump is maintenance-free and requires no oil.

CONNECTIONS

Guidance on cleaning and lubricating connections to prevent leaks.

NOZZLE CLEANING (FIG. 12)

Steps to clean a clogged nozzle using the provided kit.

CLEAN THE WATER INLET FILTER (FIG. 8)

STORAGE

ENGINE

Directs users to the engine manual for storage recommendations.

PUMP (FIG. 13)

Recommends pump protector or RV antifreeze for storage.

ACCESSORIES

DANGER: Risk of fluid injection.

Warning about using correct length lances/guns and recommended accessories.

LIMITED WARRANTY

90 DAY LIMITED WARRANTY ON PRODUCT COMPONENTS EXCLUDING PUMP

Covers wheels, gun, hose, wand, etc., for 90 days.

ONE YEAR LIMITED WARRANTY ON PUMP AND FRAME

Covers the pump and frame for one year.

ENGINE WARRANTY

Engine warranty is handled by the engine manufacturer.

TROUBLE SHOOTING GUIDE

Engine will not start

Provides causes and solutions for engine starting problems.

No or low pressure (initial use)

Troubleshooting steps for initial low or no pressure issues.

Will not draw chemicals

Solutions for when the unit fails to draw cleaning chemicals.

Simpson S2700H Specifications

General IconGeneral
Power SourceGasoline
Pressure2700 PSI
Flow Rate2.3 GPM
Pump TypeAxial Cam
Nozzle Types0°, 15°, 25°, 40°, Soap
Hose Length25 feet

Related product manuals