10 Control Panel/Before First Use
Program;
Temperature
Spin
Easy Iron;
40° C to
Cold
To spin the laundry and to
drain the water in the drum;
maximum load 7 kg.
Synthetic or mixed fabrics,
to be ironed underwear,
coloured garments,
non-shirnk shirts, blouses;
maximum load 3.5 kg.
Blanket;
40° C to
30° C
Special program for one
synthetic blanket, duvet,
bedspread and so on;
maximum load 3 kg.
Handwash;
30°
Special program for hand
washing fabrics;
maximum load 2 kg.
Jeans;
60° C to
Cold
Jeans & dark coloured to
prevent detergent residue;
maximum load 7 kg.
Type of load;
Max. weight of load
Cycle
description
Options can be
combined
Wash
Rinses
Short Spin
-
-
-
Wash
Rinses
Short Spin
-
-
-
Wash
Rinses
Short Spin
-
-
-
Drain
Spin phase
-
-
Spin, Delay Start
Spin (Max. 900 RPM),
Rinse Hold, Rinse +,
Delay Start
Spin (Max. 700 RPM),
Delay Start
Delay Start
- Wash
- Rinses
- Long spin
Spin, Rinse Hold,
Delay Start
1) Cottons Economy 60 °C program is recommended for a full load of normally
soiled cottons, and is the water and energy rating label program (in accordance with
AS/NZS 2040 : 2005 & AS/NZS 6400 : 2500).
BEFORE FIRST USE4.
Ensure that the electrical and water
connections comply with the
installation instructions.
Put 2 litres of water in the detergent
compartment for washing phase.
This activates the drain system.
1.
2.
3.
Select a Cottons cycle at 90 °C,
without any laundry in the machine,
to remove any manufacturing
residue from the drum and tub.
Pour 1/2 a measure of detergent
into the dispenser drawer and start
the machine.
To Next Page
Loading...
