Care And Cleaning
23
IMPORTANT!
Close the filter cover.
Insert the mains plug again.
The filter is inserted correctly
when the indicator on this
top is visible and you will
hear “Click” sound.
7.
8.
9.
Do not start washing
clothes without the filter
in its place.
WARNING!
If your water is very hard or contains
traces of lime deposit, the water inlet
filter may become clogged.
It is therefore a good idea to clean it
from time to time.
Remove the water inlet hose from
the water tap.
Remove the inlet hose behind the
appliance.
Clean the filter in the valve with a
stiff brush or a towel.
Install again the inlet hose. Make
sure that the couplings are tight to
prevent leakages.
Clean the filter in the inlet hose with
a stiff brush.
8.8 Cleaning The Water Inlet Filter
To clean the water inlet filters:
1.
Close the water tap.
2.
3.
4.
5.
6.
7. Open the water tap.
45°
To Next Page
Loading...
