Why is my Simpson SWT5541 not working?
If your Simpson Washer isn't working, here's what to check: * First, ensure the power is switched on at the power point. * Test the power point with another appliance to confirm it's supplying electricity. * Make sure the water taps are turned on. * If the washer switched off due to being out of balance, open the lid, redistribute the load, and close the lid. * Confirm that the lid is fully closed.
What to do if Simpson SWT5541 won't spin and has water in it?
If your Simpson Washer has washed the load but won't spin and there's still water in the wash bowl, the issue could be due to: 1. An out-of-balance load: Open the lid, redistribute the load, and close the lid. 2. The lid not being fully closed: Ensure the lid is completely closed. 3. A blocked drain hose: Check the drain hose for any blockages. After checking the drain hose, wait a short while; the wash should continue.
Why won't my Simpson SWT5541 fill with water?
If your Simpson Washer will not fill with water, make sure that the water taps are turned on. Also, check the inlet hoses for any blockages and clean the tap filters/washers if necessary.
How to fix a Simpson SWT5541 that vibrates excessively?
If your Simpson Washer vibrates excessively or goes out of balance during the spin cycle, it might not be level. Ensure the machine is level and that the leveling feet are adjusted to touch the floor. Also, redistribute the clothes evenly inside the washer.
Why is there water on the floor near my Simpson SWT5541?
If you find water on the floor near your Simpson Washer, check the inlet and drain hose connections at both the taps and the rear of the machine to ensure they are not loose. Condensation from hot water can also be a cause.
Why are clothes still dirty after wash in my Simpson SWT5541?
If your clothes are still dirty after running a wash program in your Simpson Washer, it could be due to not using enough or any detergent. Check the detergent usage and rewash the clothes. Also, make sure that you don't put too many clothes in the load. Finally, ensure that you have selected the correct wash program and temperature; if not, reselect and rewash.
Why does water keep flowing into my Simpson Washer?
If water is flowing into the wash bowl of your Simpson Washer indefinitely, the drain hose might be too low. Raise the drain hose or fit a syphon break. Refer to installation instructions for correct positioning of the hose.
Why is my Simpson SWT5541 Washer splashing water?
If you are experiencing water splash from your Simpson Washer, it may be due to too many clothes in the machine. See maximum clothes load on page 9. Also, make sure that your machine is levelled properly. Finally, ensure that your water level selection is correct. See water level description on page 9.
Why is my Simpson SWT5541 Washer making a scraping noise on spin?
If you hear a scraping noise during the spin cycle of your Simpson Washer, it's possible that a bra wire or another thin item has gotten caught between the inner and outer washbowls. If the item is visible, remove it with pliers. In the future, use a wash bag to prevent this.
General| Model | SWT5541 |
|---|---|
| Loading Type | Top Load |
| Capacity | 5.5 kg |
| Spin Speed | 850 RPM |
| Energy Rating | 2 Stars |
| Delay Start | Yes |
| Child Lock | Yes |
| Water Consumption | 89 L |
Specifies intended use for household applications and advises careful reading of the manual for safety.
Covers safe operation, including avoiding alterations, small pets, hard objects, and proper use of additives.
Guidance on checking for damage, location, hose checks, and adjusting feet for stability.
Instructions for domestic use, fabric selection, load limits, pocket checks, and handling specific materials.
Precautions for children, including supervision, packaging dangers, and secure storage of detergents.
Guide on how to select wash programs using the main selector knob.
How to adjust wash water temperature using the dedicated button.
Instructions on selecting water level based on the clothes load size.
Guidance on choosing and using detergent, quantity, and avoiding issues like sudsing or poor wash results.
Four key points for loading clothes: even loading, avoid wrapping, no overloading, mix large/small items.
How to measure, mix, and add detergent, with usage warnings.
To Next Page