Simpson SWT954 User Manual

24 pages

Questions and Answers:

D
Dean WatkinsAug 14, 2025
Why is my Simpson SWT954 machine not working?
- R
  Ryan BrownAug 14, 2025
  Your Simpson Washer might not be working due to several reasons: * The power may not be switched on; ensure the power point is on. * There might be no electricity supply; test the power point with another appliance. * The water taps might not be turned on; turn them on. * An out-of-balance switch might be activated; open the lid, redistribute the load, and close the lid. * The lid might not be fully closed; ensure it is closed properly.
G
Gary HallAug 18, 2025
What to do if Simpson SWT954 Washer machine has washed load but will not spin?
- J
  James PageAug 18, 2025
  If your Simpson Washer has washed the load but won't spin, it could be because the load is out of balance. Open the lid, redistribute the load, and then close the lid. Alternatively, the lid may not be fully closed; ensure that the lid is properly closed.
B
Brooke MeyerAug 21, 2025
What to do if water on floor near Simpson SWT954?
- C
  Charles DuncanAug 21, 2025
  If water is pouring onto the floor near your Simpson Washer, turn OFF both wall taps.
T
Tara FreemanAug 25, 2025
How to fix Simpson Washer that will not fill with water?
- T
  Tricia CunninghamAug 25, 2025
  If your Simpson Washer is not filling with water, it could be due to several reasons: * The water taps may not be turned on; turn the taps on. * The inlet hoses may be blocked; clean the tap filters/washers. * There might be too much water for the load size; use a low water level. * The water level might be incorrect for the size of the load; check detergent use and rewash.
J
Joshua HerreraAug 27, 2025
What to do if water flowing into Simpson SWT954 Washer washbowl indefinitely?
- W
  William OrtizAug 27, 2025
  If water is flowing into your Simpson Washer washbowl indefinitely, it may be because the drain hose is blocked. Check the drain hose for any blockage.
J
Janet JonesAug 31, 2025
What to do if my Simpson Washer clothes still dirty after wash program?
- S
  Sharon ChavezAug 31, 2025
  If your clothes are still dirty after the wash program in your Simpson Washer, it could be due to: * Too many suds causing motor temperature overload; reduce detergent dose or use low sudsing detergent in the future. * Not enough or no detergent; check detergent use and rewash. * Too many clothes in the load; remove some clothes and rewash. * Incorrect wash program or temperature selected; reselect the program or temperature and rewash.
R
Robert RiveraSep 3, 2025
Why Simpson SWT954 Washer machine goes out of balance or vibrates excessively when spinning?
- A
  Angela WilliamsSep 4, 2025
  Your Simpson Washer may be going out of balance or vibrating excessively due to: 1. The machine not being level; make sure the machine is level. 2. Levelling feet not adjusted; adjust the feet to touch the floor. 3. Clothes not evenly distributed; redistribute the clothes evenly.
J
jessicahowardSep 6, 2025
What causes scraping noise on spin in Simpson Washer?
- G
  gonzalezhannahSep 7, 2025
  A scraping noise during the spin cycle in your Simpson Washer is caused by a bra wire or other thin items caught between the inner and outer washbowls. If the item is visible, remove it with pliers. Consider using a wash bag in the future.
M
Martha ColemanSep 10, 2025
What are humming, clicking and other noises from Simpson SWT954?

Simpson SWT954 Specifications

General

Brand	Simpson
Model	SWT954
Category	Washer
Language	English

Summary

Knowing Your Simpson Washing Machine

Machine Components Overview

Identifies and illustrates the main components of the washing machine.

Water and Energy Saving Features

Details features and practices for water and energy efficiency.

Deep Rinse vs. Eco Rinse Comparison

Compares the water usage and cycle times of Deep Rinse and Eco Rinse.

Control Panel Functions

Explains the buttons, lights, and displays of the control panel.

Model-Specific Control Panel Details

Details control panels for different models (SWT704, SWT954, SWT754).

Understanding Machine Status

Describes status indicators like 'out of balance' and how to resolve them.

Button and Light Feedback System

Explains how buttons and lights indicate machine status and actions.

Washing Instructions and Operation

Preparing Your Laundry

Guidance on sorting clothes, checking for damage, and loading.

Adding Wash Agents

Instructions for adding detergent, fabric softener, and bleach.

Selecting Wash Programs

Steps to start the machine and choose wash programs.

Program Guide and Water Level Selection

Details wash programs, water levels, and their selection.

Wash Temperature and Soak Time

Explains how to select wash temperature and soak duration.

Managing the Wash Cycle

How to start, pause, stop, and understand cycle progress and end states.

Lid Lock Safety Feature

Information on the safety feature that locks the lid during operation.

Advanced Washing Features

Machine Status Communication

How the machine communicates status through display codes and beeps.

Rinse Option Variations

Details the available rinse options like Extra, Deep, Eco, and Fast rinse.

Eco Option Functionality

Explains eco-friendly options like Water Return, Water Save, and Rinse Save.

Water Conservation Methods

How to use Water Save and Rinse Save features for water conservation.

Drain and Return Hose System

Description and illustration of the drain and return hose setup.

Caring for Your Washing Machine

Post-Wash Maintenance

Steps to take after completing a wash cycle for maintenance.

Lint Filter Cleaning Guide

Step-by-step guide for cleaning the lint filter to maintain performance.

Interior and Exterior Cleaning

Instructions for cleaning the machine's interior and exterior surfaces.

Stain Removal and Preventing Build-up

How to clean stains in the wash bowl and prevent detergent build-up.

Essential Safety Precautions

Important safety guidelines for operating the washing machine.

Handy Washing Tips

Resolving Fabric Discoloration

Causes and solutions for clothes becoming grey or yellow over time.

General Stain Treatment Advice

General advice and precautions for treating stained clothes.

Specific Stain Removal Guide

Detailed instructions for removing various types of stains from fabrics.

Troubleshooting Common Issues

Machine Start-up and Spin Problems

Diagnosing issues with the machine not starting or failing to spin.

Water Management Faults

Troubleshooting problems with water filling, draining, or leaks.

Operational Faults and Noises

Resolving spin balance, vibration, dirty clothes, and unusual noises.

Diagnostic Codes and Service Advice

Specific Fault Codes and Solutions

Explains specific fault codes (E11, E30, E20, E13, E50) and their troubleshooting.

Warranty and Service Information

Understanding Your Product Warranty

Outlines the standard terms, conditions, and coverage of the product warranty.

Liability Limitations and Privacy

Details warranty liability limitations and privacy considerations for claims.

Related product manuals

Simpson SWT9043

Preview: Simpson SWT8043

Simpson SWT8043

Preview: Simpson SWT5542

Simpson SWT5542

Preview: Simpson SWT5541

Simpson SWT5541

Simpson SWT7542

Simpson SWT8542

Simpson SWT6541

Simpson SWT6041

Simpson SWT1254LCWA

Simpson SWF85561

Preview: Simpson SWF8025DQWA

Simpson SWF8025DQWA