465 mm (18.3”)
261 mm
(10.3”)
Radome (bottom)
Rubber foot
Mounting base
Washer
Spring washer
M10 Hexagonal bolt
Included
Tighten the four bolts
to 20 Nm
Forward
Installation 1-4 Radar scanners DX45/60
DX45 Radome scanner
• 46.5 cm radome
• 4 kW
• Range up to 28 nm
• Rotation speed 20-50 rpm
• Beamwidth: Horizontal 5.6°
Vertical 30°
The four bolts included will suffice for mount base thickness of 9 to 14 mm
(0.35 to 0.55 in.). If the mount base is thicker or thinner than this, prepare bolts
as listed on page 1-3. Use silicone to secure the bolts.
To Next Page
Loading...