Simrad DX45 - List of Alarms and Warnings; Scanner Rotation Alarms; Communication Alarms; Orientation Mode Alarms

List of alarms/warnings
- Bearing pulse alarm (check if scanner is rotating)
- Bearing zero alarm (check if scanner is rotating)
- Changing to Head-Up alarm (indicates the orientation mode has
changed - see section 3.2.5 and 3.2.7*)
- Communication failure alarm (check connection to scanner)
- Communication time-out failure alarm (no communication
between display and scanner)
- Guard Zone alarm (see GZ under section 3.2.5*)
- Heading missing alarm (check connection to compass)
- Position missing alarm (see Position update under section 6.3*)
- Rotation lock alarm (check if scanner is rotating)
- Trigger fail alarm (check connection to scanner)
*) refer to display unit’s Operator manual.
Page-V